REaktiv PRIMER

REaktiv PRIMER is an adhesion enhancer for asphalt and concrete. It contains no solvents and is therefore safe for health and the environment.

Application Areas:

• Improvement of layer adhesion on existing asphalt or concrete surfaces
• Primer for use before REPHALT® or REFUG® applications

Requirements:

The surface must be dust-free and (moderately) dry.

Application of REAKTIV PRIMER (Bucket):

1. Stir thoroughly before use.
2. Apply directly from the bucket to the damaged area and evenly spread thinly, especially on the edges, using a dry brush. Full surface pre-treatment is not required. Attention: Over-application reduces adhesion!
3. No waiting time required before subsequent application.
4. Clean tools with commercially available cleaning agents (e.g., biodiesel).

Application of REAKTIV SPRAY PRIMER:

1. Shake well before use.
2. Spray from a distance of approximately 20 cm, focusing on the edges of the damaged area. Full surface pre-treatment is not required. Attention: Over-application reduces adhesion!
3. No waiting time required before subsequent application.
4. Clean tools with commercially available cleaning agents (e.g., biodiesel).

Consumption:

REAKTIV PRIMER: 250 – 500 g/m²

REAKTIV SPRAY PRIMER: 100 – 300 g/m²

Our product guidelines are general recommendations based on average values and do not apply to applications under special conditions or loads. The suitability for the intended purpose and local conditions must be verified by the user in advance.

Packing and Delivery Units:

• REAKTIV PRIMER, Art. No. 63004, Container: 6.5 kg, Palletizing: 30 metal buckets per pallet
• SPRAY PRIMER, Art. No. 87635, Container: 750 ml, Palletizing: 12 spray cans per carton