STRADAKOL

STRADAKOL is a colored surface sealer

Application Areas:

• Visual design of asphalt surfaces such as traffic areas, pedestrian and bicycle paths, and parking lots with low traffic loads.
• Visual harmonization of asphalt surfaces with different mix compositions and varying ages.
• Highlighting asphalt surfaces through various color design options.
• Suitable for concrete surfaces without exposure to rolling traffic. Pre-treatment of concrete surfaces is required to ensure a load-bearing substrate of at least 1.5 N/mm².

Requirements:

The surface to be treated must be dry, clean, grease-free, and structurally sound according to its intended use. The material temperature must be at least +15°C, and the ground temperature at least +10°C.

Application:

1. Thoroughly clean the surface to be sealed and tape off with suitable masking tape.
2. Stir STRADAKOL thoroughly with a drill mixer until homogeneous before application.
3. Apply STRADAKOL in portions, depending on the roughness of the surface, using a
   rubber squeegee or lambskin roller.
4. Work the applied material with a lambskin roller for even distribution.
5. In dry and warm weather, STRADAKOL becomes walkable and recoatable within a few hours and is rain-resistant once fully cured.
6. At ambient temperatures above 30°C (in the shade), application of the product becomes more challenging.

Consumption:

Depending on surface roughness, approximately 1.0 – 1.5 kg/m² per coat, based on the total area.

Our product guidelines are general recommendations based on average values and do not apply to applications under special conditions or stress. The suitability for the intended purpose and local conditions must be verified by the user in advance.

Packing and Delivery Units:

Sample panel available upon request!