STRADAFIX®
The Durable, Eco-Friendly Asphalt Regeneration

- Engine oil and diesel resistant
- Easy to apply
- Suitable for indoor use
- Cold processable
STRADAFIX® is a fuel-resistant, mineral-filled polymer slurry that can also be used in enclosed spaces.
Application Areas:
- Visual alignment of different asphalt surfaces
- Sealing fine cracks and open-pored/rough asphalt
- Regeneration of lightly to moderately stressed traffic areas (e.g., parking lots, driveways, courtyards, pedestrian and bicycle paths)
- Fuel-resistant to diesel fuels (3b) and used combustion engine oils/automobile transmission oils (4c), but NOT to gasoline.


Requirements:
The surface must be dry to damp, clean, and free from oil/grease for sealing. The ground temperature should be between +10°C and +30°C during application.
Application:
- Clean contaminated asphalt surfaces using a high-pressure cleaner. The cleaned surface can be damp but not wet!
- Stir STRADAFIX® thoroughly with a drill mixer before application.
- Tape off the area with suitable adhesive tape and pour STRADAFIX® in portions onto the surface.
- Spread the portions evenly with a rubber squeegee …
- … and finally, roll over the area with a sealing roller to fill the pores in strips.
- STRADAFIX® is walkable within a few hours in warm temperatures.
Note: Overlapping and streak marks are process-related and do not constitute defects. For porous and very rough surfaces, a second application with intermediate drying is recommended.
Consumption:
Depending on surface roughness, an average of approximately 1.0 – 2.5 kg/m², based on the total area.
Our product instructions are general guidelines based on average values and do not apply to applications under special conditions or stresses. The suitability for the intended purpose and local conditions must be verified by the user in advance.
Packing and Delivery Units:
STRADAFIX®; Art. No. 63150; Container: 15 kg; Palletizing: 12-48 buckets