RESIST 2K
The Fuel-Resistant Surface Coating for Asphalt Surfaces
- Reactive curing
- Easy to apply
- 100% active substance
- Can also be used indoors
RESIST 2K is a fuel-resistant surface coating whose binder properties are optimally adapted to asphalt surfaces.
The coating structure depends on the load category. Please consult your VIALIT specialist advisor for more information!
Application Areas:
- Recreational facilities
- Parking and forecourts
- Sidewalk and bicycle paths
- Airports
- Warehouses
- Underground garages
- Gas stations
Requirements:
The surface to be treated must be dry, clean, grease-free, and structurally sound according to its intended use. If necessary (foreign materials, old coatings), pre-treatment by shot blasting or sandblasting is mandatory.
The material temperature should be +20 °C, and the substrate temperature should be between +10 °C and +30 °C.
Application:
- Apply a 4 x 4 mm grid to the thoroughly cleaned surface using GRID ADHESIVE (approx. 0.7 – 0.9 kg/m²), including masking if required.
- Stir RESIST 2K Component A thoroughly. Completely mix Component B into Component A until a homogeneous mixture is achieved.
- Apply the mixed RESIST 2K product in portions onto the substrate and spread it evenly using a
rubber squeegee. - Generously sprinkle with suitable grit material 0.5 – 2 mm (approx. 6 – 8 kg/m²) and sweep off after the drying period.
- If required, apply a colored sealant with
STRADAKOL. - The mixed RESIST 2K product must be applied quickly and fully utilized. Once mixed, it cannot be stored!
- All tools used must be cleaned with standard road construction cleaning agents before curing begins.
Consumption:
Depending on surface texture, approximately 2.2 – 2.5 kg/m², based on the total area.
Our product instructions are general guidelines based on average values and do not apply to applications under special conditions or stresses. The suitability for the intended purpose and local conditions must be verified by the user in advance.
Packing and Delivery Units:
Item No. | Container | Palletizing | Description |
---|---|---|---|
62000 | 22.5 kg | 18 units/pallet | Resist 2K, Component A, black |
62001 | 22.5 kg | 18 units/pallet | Resist 2K, Component A, gray |
62900 | 2.5 kg | 18 units/pallet | Resist 2K, Component B |
88002 | 15.0 kg | 24 buckets/pallet | Grid adhesive |
The coating structure depends on the load category. Please consult your
VIALIT specialist advisor!